2 – English
WARNING! The power cutter can be
dangerous! Careless and incorrect use can
result in serious or fatal injury to the
operator or others.
SYMBOL EXPLANATION
Symbols on the power cutter:
Please read the instructions carefully and
make sure you understand them before
using the power cutter.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective glasses or visor
Switch off the engine by moving the stop
switch to the fixed STOP position before
carrying out any checks or maintenance.
Symbols in the Operator's Manual:
Warning
Cutting creates a lots of dust which can
cause inhalation damages. Use appropriate
dust mask or respirator protection. Avoid
breathing petrol fumes and exhaust gases.
Provide for good ventilation.
Warning
Sparks from the cutting blade can cause
fire in combustible materials such as: petrol
(gas), wood, dry grass etc.
Protective glasses or a visor must be
worn.
Visual check.
Regular cleaning is required.
Always wear approved protective gloves.
Run position.
Stop with spring loaded return to Run
position.
Stop, in fixed position.
1 K950 ring power cutter
1 Wooden carrying case
1 Tool kit
1 Operator’s manual
1 Illustrated parts list
The Partner K950 ring power cutter a hand-held power
cutter that cuts 260 mm (10") with a 350 mm (14")
blade.
This design is exclusive to Partner Industrial Products,
and is another example of Partner’s continuous
commitment to design excellence.
THE PARTNER K950 RING INCLUDES:
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
To Next Page
Loading...
