RP-700User’s Manual
2 Specification
2.1 Technical specification
Item
Parameter
Printing
Print method Direct thermal line printing
Resolution 203 × 203DPI; 203 × 180DPI
Paper width 57.5/80/82.5mm
Print width Max.80mm
Print speed Max.250mm/s
Flash LOGO Max. 1M bytes
Command buffer area 64K bytes, 4K bytes or 45 bytes
Interface
USB USB2.0 (full speed)
Serial interface RS-232C
MFi(BT) interface V4.0
Ethernet interface 10/100BASE-T
Cash drawer Can select to controlling 1~2 cash drawers
Memory RAM: 2MB, Flash: 4MB
Printer status detection
Paper end sensor/ black mark sensor;
Paper near end sensor;
Cover position sensor;
Paper presence sensor
Print head temperature sensor;
Printer voltage detection
Cut mode Full cut, partial cut
Barcode
1D
UPC-A, UPC-E, CODE 39, CODE 93, CODE 128, EAN8, EAN13,
ITF, CODABAR
2D PDF417, QR, Maxicode
Fonts
Font A: 12 × 24
Font B: 9 × 17
Kanji font A: 24 × 24
Character set
95 Alphanumeric
14 types of international characters
128 x 68 code page
Optional: Traditional Chinese, Simplified Chinese
(GB2312/18030), Japanese, Korean, English, HK
User-defined font (95) & code page
Character enlargement All characters can be enlarged 1-6 times horizontally and vertically
Character rotation Rotation printing in four directions (0°, 90°, 180°, 270°)
Command ESC/POS compatible
Paper
Paper type
Thermal continuous paper
Thermal marked paper
Paper roll OD Max. 83mm
- 2 -
To Next Page
Loading...
