Wireless Smart Gate Connect the Sensor Wirelessly in PASCO Capstone
38
013-16123A
setting up a Timer in PASCO Capstone. You can
go through the same process to create a Timer
Setup for UK Timing Modes.
3. Click the green star-shaped button to create a new
Timer Setup.
4. Select “Pre-Configured Timer”. Select “Next”.
5. Click “Next” to open Step 3
.
• Step 3 warns that the default timer (Smart Gate
(Single Flag) will be removed. Ignore the warning.
6. Click “Next” to open Step 4.
• Step 4 allows you to select the type of timer you
would like to create.
To Next Page
Loading...