Paslode IM200Li.2 - Fasteners and Applications; Nailer Applications; Compatible Fasteners and Part Numbers

14
Fasteners and Applications
Applications
The Paslode Impulse 18 ga. Brad Nailer is suited for a variety of applications. These include securing door and
window casings; attaching baseboards where walls meet floors; attaching moldings where walls meet ceilings;
securing paneling; securing chair rails, picture molding and other decorative trim.
The Paslode Impulse
18 ga. Brad Nailer
r
drives Paslode 18 Gauge Brad Nails. Fasteners are collated into strips of 50
for easy loading.
Paslode fasteners are designed to be used in Paslode tools, use of other fasteners may cause damage
to the tool or injury to the tool operator.
Fasteners
THE PASLODE IMPULSE 18 Ga. BRAD NAILER DRIVES
THESE NAILS
PART
NO.
Length
Applications
950058 5/8"
Cabinetry,Cove Molding, Shoe & Base
Molding, Underneath Stair Tread, Mitered
Corners, Lattice Strip Molding, Crown
Molding Outside Corners, Book Cases
950001 1"
Cabinetry,Cove Molding, Shoe & Base
Molding, Underneath Stair Tread, Mitered
Corners, Lattice Strip Molding, Crown
Molding, Book Cases
950114 1-1/4"
Cabinetry, Shoe & Base Molding, Scribe
Molding, Crown Molding, Book Cases
950112 1-1/2"
Cabinetry, Shoe & Base Molding, Risers, Stairs,
Knee Wall, Panel Installation, Wainscoting,
Chair Rail, Window Casings, Door Casings,
Book Cases
950002 2"
Cabinetry, Shoe & Base Molding, Spindles,
Risers, Stairs, Knee Wall, Panel Installation,
Wainscoting, Panel,Chair Rail, Window
Casings, Door Casings, Book Cases