5
Description Specifications
Dimensions: Weight-with battery 2.0 Kg
Height 292 mm
Length 274 mm
Magazine Angled
(use Paslode angled fasteners only.)
Cycle Rate: Intermittent Operation – 2 to 3 nails
per second
NOTE:
Fasteners: 16 Gauge Angled - 1.6 mm
Magazine
Capacity:
2 nail strips, or 100 fasteners.
Battery : 7.4 volts DC - Provides enough energy to
drive approximately 6000 fasteners on a
full charge.
Fuel Cell:
Magazine Assembly
Fuel Cell Compartment
Cap
Removable
Grille & Filter
No-Mar Tip
Handle Assembly
(Soft Grip)
Soft
Touch
Trigger
Motor
Assembly
Battery Compartment
(opposite side)
Battery Indicator Light
(opposite side)
Follower
Motor Housing
Nail Count Indicator
Lockout
Feature
Adjustable
Depth of Drive
(opposite side)
Quick Clear
Cover
Rafter/Belt Hook
Overview of the Paslode Impulse
16 Gauge Lithium-Ion Angled Bradder
Your new Paslode Impulse 16 gauge Li-Ion Angled Bradder
offers the latest in cordless power nailing technology and is
the result of more than 75 years of experience in develop-
ing power nailing systems. Engineered with the demands of
the trade professional in mind, the Paslode Li-Ion Angled
Bradder is designed to provide years of reliable service. To
help you get the most from your new Li-Ion Angled Bradder
this operation guide provides important information on
safety and tool operation as well as service and trouble-
shooting tips.
The Paslode Impulse 16 gauge Li-Ion Angled Bradder is an
internal combustion design. To keep your Li-Ion Angled
Bradder operating at its best you will need to ensure regular
maintenance and cleaning.
Paslode accredited warranty service agent or visit www.
paslode.com.au | www.paslode.co.nz.
Bradder. For more information please contact your local
dures to properly clean and maintain your Li-Ion Angled
tenance booklet which provides instruction of the proce-
Angled Bradder comes with a separate cleaning and main-
To help with this, your Li-Ion
As you can see in the illustration below, the Impulse 16
gauge Li-Ion Angled Bradder is made up of three major
areas: handle, motor, and magazine.
is designed to drive several thousand nails in a typical workday.
The Paslode Impulse 16 gauge Lithium-Ion Angled Bradder
Exceeding the recommended cycle rates may cause
the tool to overheat, reduce performance or damage
the tool.
Paslode bradder fuel cell.
Part #B20544S.
Liquid hydrocarbon - Provides enough fuel
to drive approximately 1,000 fasteners.
To Next Page
Loading...
