Paton MINI - Generator Operation; Storage and Transportation; Storage; Transportation

PATON ECO DC MMA - 12 -
5. GENERATOR OPERATION
The power supply is suitable for generator operation, provided as follows:
When working with
an electrode
Set current value
Minimum generator power
Ø2 not more than 80 А 3.0 kVA
Ø3 not more than 120 А 4.5 kVA
Ø4 not more than 160 А 6.0 kVA
Ø5 fusible not more than 200 А 7.7 kVA
Ø5 refractory not more than 250A 10 kVA
Ø6 up to 315A 13 kVA
CAUTION! For trouble-free operation, the generator output voltage should not
go beyond the permissible limits of 170-260V (or 320-440V for ECO-315-400V)!
6. STORAGE
Store the conserved and packaged source under storage conditions 4 in accordance
with GOST 15150-69 for a period of 5 years.
The de-conserved source should be stored in dry closed premises at an air
temperature not lower than +5
0
С. The premises should be free of acid vapours and other
active substances.
7. TRANSPORTATION
The packed source is suitable to be transported by all transport means ensuring its
safety in compliance with the transport rules established for the applicable type of transport.
8. TECHNICAL DATA
CAUTION! If the power supply is designed for a specific supply voltage, its
technical data can be found on the identification plate on the top or rear panel. In this
case, the mains plug, mains cable should be selected according to the voltage to be used.
Parameters
MINI
ECO-160
ECO-200
ECO-250
ECO-315
Rated mains voltage 50 / 60Hz, V ~ 220 ~ 220 ~ 220 ~ 220 ~ 3x380
Mains voltage variation limits, V
170 - 260
170 - 260
170 - 260
170 - 260
±15%
Efficiency, % 90 90 90 90 90
Limits of regulation of welding current,
A
20 – 150 20 - 160 25 - 200 32 - 250 50 - 315
Welding current at:
5 min / 45% LD
5 min / 100% LD
150 A
94 A
160 A
101 A
200 A
126 A
250 A
158 А
315 A
210 A