Need help?Do you have a question about the Pax Technology PRIORITY A80 and is the answer not in the manual?
Details the scope of the reference guide, covering hardware, installation, communications, and FAQs.
Identifies the target readers, including software engineers, sales executives, and ISOs.
Defines key acronyms and terms used throughout the document, presented in a table format.
Illustrates the front, back, left, and right views of the A80 terminal with labeled hardware features.
Explains how to connect the A80 to a power source and notes important warnings.
Details the location of serial number, revision number, and part number on the A80 terminal.
States the standard two-year warranty period and provides a warning about its terms.
Describes the A80's 0.3MP camera and its capability for scanning barcodes and QR codes.
Details the A80's high-speed thermal printer, including print speed and paper specifications.
Lists the supported SIM, SAM, and SD card types and sizes for the A80 terminal.
Describes the different card readers available on the A80: MSR, EMV, and NFC/Contactless.
Provides information on major A80 accessories, including cables and the PS200 terminal stand.
Specifies that the A80 is intended for indoor, attended use only and provides environmental operating conditions.
Advises on optimal placement of the A80 terminal, avoiding direct sunlight, dust, moisture, and interference.
Provides step-by-step instructions on how to turn the A80 terminal on and off using the power button.
Guides users on how to adjust the screen brightness level through the device's settings menu.
Explains how to enable or disable the sound feedback for key presses in the device settings.
Details the process of adjusting the media and notification volumes on the A80 terminal via settings.
Instructs users on how to configure the screen's sleep time or auto-lock duration in the display settings.
Guides users on how to open the camera application and capture a photo using the A80 terminal.
Provides important warnings and instructions for safely cleaning the A80 terminal, avoiding damage.
Explains DHCP setup for network access, outlining how IP addresses are dynamically assigned by a DHCP server.
Details the process for configuring a static IP address for network and internet access on the A80.
Explains how to manually configure a static IP connection when the broadcast SSID is disabled.
Covers proxy setup, explaining how a proxy server acts as an intermediary for internet requests.
Guides users on setting up an Ethernet connection by plugging in the cable and configuring network settings.
Explains PAXSTORE as an online marketplace for terminal applications and management solutions.
Confirms that the A80 can download applications from PAXSTORE using its client application.
States that the A80 currently does not support application downloads from BroadPOS.
Explains the 'Login failed' error message as a potential serial number registration issue on PAXSTORE.
Troubleshoots blank printing issues by suggesting reverse thermal paper installation.
Lists potential causes for the terminal not powering on, including defective AC transformer or power cord.
Provides troubleshooting steps for Wi-Fi connectivity issues, including checking settings, rebooting, and coverage.
General| Camera | 5MP Rear Camera |
|---|---|
| Operating System | Android |
| Connectivity | 4G, Wi-Fi, Bluetooth |
| Ports | USB-C |
| Card Reader | Magnetic stripe card |
To Next Page
