PAX A80 User Manual

PAX A80 Quick Setup Guide
15
Wi-Fi Proxy Setup
This section describes the Wi-Fi Proxy Setup.
Perform Steps 1 through 3 in the Wi-Fi DHCP Setup section, then perform the
following:
To manually configure the network, in the upper right-hand corner of the screen
select the three dots ( ) icon.
Select the “Add network” option and the Add Network pop up screen displays.
Input the case sensitive Wi-Fi network SSID.
Select the appropriate network security type from the Security drop-down menu.
Input the case sensitive Wi-Fi network password.
Select “Advanced options”.

PAX A80 Specifications

General

Security	PCI PTS 5.x approved
Display	480 x 800 pixels
Connectivity	Wi-Fi, Bluetooth, 4G
Card Readers	Magnetic Stripe
Battery	2600mAh
Touch Panel	Capacitive
Ports	Ethernet
Printer	Thermal printer, 58mm paper roll
Certifications	PCI PTS 5.x