Terminal Communications
The E500 supports the following types of communication:
• Ethernet LAN
• Serial Port RS232
• USB
• GSM/GPRS
• WDCMA
• TD-SCDMA
• 4G FDD-LTE & TD-LTE
• Wi-Fi 802.11 b/g/n
• Bluetooth BLE 4.0
• PSTN Dial Modem (optional with EM100 external module)
Wi-Fi Service
The terminal Wi-Fi capability allows the terminal to connect to a wireless network allowing the flexibility
to locate the terminal almost anywhere within the wireless network coverage area. Using wireless
communications allows the terminal to send and receive transaction information quickly resulting in fast
transaction times.
To setup wireless communications, configure the terminal Wi-Fi parameters to the Wi-Fi network
settings.
Note: The SSID wireless access point name and wireless security password is case sensitive and must
exactly match the Wi-Fi network settings. Also, be sure to set Wi-Fi as the Main or Back up
communication method according to your installation needs.
To Next Page
Loading...
