Terminal Ports
At the back of the E500, ports enable the terminal to add peripherals such as PIN pads, check readers,
contactless readers, other external devices, to enable local terminal downloads and communications,
and to provide power. The ports are labeled and color-coded.
The following connectors are available on the back of the E500:
• Cash Drawer (RJ11, 24V) – Used to connect to the cash drawer
• RS232 (RJ45) – Used to connect an external POS device or check reader
• LAN A – Used for bi-directional Ethernet connections using DSL or Cable
• LAN B – Used for bi-directional Ethernet connections using DSL or Cable
• USB-Host – Type A
• HDMI (1.4 Type A) – Used to connect to HD TV or display. Supports 720P or above.
• USB-OTG (Micro-B) - Used for local terminal downloads or external peripherals
• Audio Jack – Supports the microphone
• AC Power - Used to connect AC power supply to the terminal
There is an additional USB-Host 2.0 port on the right side of the terminal, as shown below:
To Next Page
Loading...
