Replacing Battery (If Required)
To replace the battery:
1. Carefully position the E500 so you have access to the bottom of the unit.
2. Using a slot head screwdriver, loosen the captive screw.
3. Remove the battery cover.
4. Gently roll the battery out of its storage compartment.
5. Carefully separate the white connector from its socket and pull the connector straight up from
the socket to remove.
Important: Do not pull the battery by its wires when you are removing it. The connector or
battery may be damaged.
6. Insert the replacement battery into the battery compartment.
To Next Page
Loading...
