PAX E500 - Install SIM or Micro SD Card (if Equipped)

PAX E500 INSTALLATION MANUAL
17
20181002-v0.5
PAX Technology®
Customer Support support@pax.us
(877) 859-0099
www.pax.us
Install SIM or Micro SD Card (If Equipped)
To install a SIM card or Micro SD card:
1. Using a flat head screwdriver, loosen the captive screw from the SIM cover on the back of the
E500.
2. Remove the SIM cover.
3. Insert the card.
4. Align the card, as shown in the drawing and insert firmly into slot.
5. Align the two plastic tabs on the cover plate into the slots on the terminal.
6. Push the cover plate into place.
7. Tighten the captive screw on the cover plate.
Note: T-Mobile and AT&T SIM cards do not need to be configured.