PEAK FCB8N: Programmable MIDI foot controller
Page 5 of 16
Specifications
• 1 MIDI OUT with 7-pin DIN connector with phantom power support on pin6 and pin7.
• 1 expression pedal programmable for each patch on independent MIDI channels.
• 2 “bank” and 12 “patch” heavy duty foot switches.
• 128 Presets arranged in 32 banks of 4 presets with 8 Instant Access controls in 4pr mode or 120
Presets arranged in 10 banks of 12 presets in 12pr mode.
• Program Change and Continuous Controller Message support (7PC , on independent MIDI channels,
and 8CC messages per preset on same MIDI channel) and 8 Global CC on different MIDI channel.
• 8 Instant Access buttons manually toggle the 8 programmable CC Messages On and Off or write a
preset value to the controller and support to call 8 Global CC on the instance access buttons.
• Flexible power requirements: 9Vdc-12Vdc or 9Vac, 100mA adapter with a 5.5mm/2.1mm barrel
connector. (Adapter is not included)
• Housed in a sleek aluminum, precision laser cut, enclosure coated with a black anodized brushed finish
• Dimensions approx.: 13.0"W x 9.0"D x 2.5"H (33.0cm x 22.90cm x 6.35cm) a little bigger than A4
paper size.
• Weight approx: 3.0lb (1.4kg)
Power Connection
The FCB8N has flexible power requirements between 9Vdc-12Vdc or 9Vac, 100mA. You can plug in your
power adapter to the 5.5mm/2.1mm barrel connector.
Do not use voltage over 12Vdc or 9Vac otherwise the unit will be damaged.
To Next Page
Loading...
