Peak PGR4N User Manual

PEAK PGR4N-Guitar Router / Switcher
Rev 3.0.0 (Dec.10, 2011) www.peak2005com
1
PEAK PGR4N
4CH MIDI Router / Switcher
Rev 3.0.0 (NOV.27.2011)
www.peak2005.com
Specifications:
• PEAK GPR4N Guitar Router/Switcher provides 4 mono audio loops for 4 stomp boxes.
• Up to 128 memory presets save to EEPROM memory.
• Each preset can be programmed sub-preset in Momentary mode. (to toggle the audio loop status when
receives the same MIDI Program Change messages (PC))
• High-quality made in Japan relays for switching loops in series.
• MIDI THRU connector for passing the MIDI IN messages to other MIDI devices.
• Supports MIDI Program Change messages (PC) and MIDI Control Change messages (CC) from MIDI
channel#1 to channel#16.
• Phantom power over Pin6 and Pin7 of MIDI IN connector.
• Powered by 250mA, 9 Volt DC Adapter (not included) with a 5.5mm/2.1mm barrel connector.
• Includes a high quality voltage regulator circuit for noise/hum reduction.
• Double power DC connector for passing the input voltage to other devices.
• Housed in SPCC restless metal chassis formed by a laser cutting process.
• Finish: Powder coated in matt black by electric beam air-brush.
• Dimensions: approx. 84 mm x 230 mm. x 40 mm.
• Weight: approx. 1,200g.

Peak PGR4N Specifications

General

Brand	Peak
Model	PGR4N
Category	Switch
Language	English

Summary

PEAK PGR4N Product Introduction

Product Specifications

Lists key features, technical details, and capabilities of the PEAK PGR4N Guitar Router/Switcher.

PEAK PGR4N Front Panel and Connectivity

Connector and Component Descriptions

Details the function of each connector, switch, and LED on the PGR4N front panel.

PEAK PGR4N Operation Examples

Single and Expanded System Diagrams

Illustrates typical connection setups for single unit and expanded system operations.

PEAK PGR4N Basic Operations

PGR4N Configuration Settings

Guide to initial device setup, including configuring MIDI program channel and device number.

Resetting to Factory Defaults

Instructions for restoring the PGR4N to its original factory default settings.

PEAK PGR4N MIDI Channel Configuration

Setting the MIDI Channel Number

Step-by-step process to select and set the MIDI channel for communication with the PGR4N.

PEAK PGR4N Device Number Configuration

Assigning a PGR4N Device Number

Procedure to assign a unique device number, essential for system expansion and multi-unit setups.

PEAK PGR4N Preset Programming

Saving and Recalling Loop Presets

Instructions on how to program, save, and recall loop configurations as presets.

PEAK PGR4N Momentary Mode

Momentary Preset Programming Guide

Explains how to enable and use the momentary mode for toggling loop status.

PEAK PGR4N MIDI Control Functions

Controlling Loops via MIDI CC

Details how to use MIDI Continuous Controller (CC) messages for latched or momentary loop control.

PEAK PGR4N Phantom Power Feature

Understanding MIDI Phantom Power

Information on the PGR4N's support for phantom power via the MIDI IN port.