EasyManua.ls Logo

Peak PKC0C1 - TROUBLESHOOTING; LED Indicator Issues; Low Voltage or No Charge; Slow or No Charging

Peak PKC0C1
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
RESOLUCIÓN DE PROBLEMAS
Problema Situación Acción
La luz LED
verde de
Batería
Cargada no
se enciende
después de la
carga
Conexiones flojas del
cable de carga en la
batería
Desenchufe el Cargador de Baterías y revise las
conexiones de la batería - asegúrese que haya una
buena conexión en los terminales de la batería y/o
chasis del vehículo.
No hay energía CA en
la toma de corriente
Asegúrese de que el Cargador de Baterías este
conectado a una toma de corriente “energizada” de
110/120 voltios CA con conexión a tierra.
El voltaje de la batería
es bajo o la batería
está dañada
Verifique el voltaje de la batería con un multímetro.
Reemplace la batería si el voltaje está demasiado bajo.
Apagado por
cortocircuito
Desconecte los cables del Cargador de Baterías y
revise si los cables del Cargador de Baterías están en
corto o si la batería está en corto. La carga continuara
cuando la condición de cortocircuito sea corregida.
Batería lenta al cargar
o no carga
Asegúrese de que se le haya permitido suficiente
tiempo de carga. Consulte TIEMPOS DE CARGA en la
página 7 para obtener más información.
Consulte ACTIVACIÓN DE PRE-CARGA en la página 6.
Verifique si la batería está sulfatada.
Batería demasiado fría. La tasa de carga aumentara a
medida que la batería se calienta por encima de 32 °F
(0 °C).
Los cables del
cargador no
están conectados
apropiadamente
Desenchufe el cargador de baterías y revise si los
cables del cargador están conectados apropiadamente.
Vea las páginas 6 y 7 para obtener instrucciones sobre
cómo conectar los cables del cargador en la batería.
9
TROUBLESHOOTING
Problem Situation Action
Green charged
LED will not
light after
charging
Loose charging cable
connections at the
battery
Unplug Battery Charger and check battery connections
- ensure that there is a good connection with the battery
terminal and/or vehicle chassis.
No AC power at outlet Make sure that the Battery Charger is connected to a
“live” 110/120-volt AC grounded outlet.
Battery voltage is low
or battery is damaged
Check the battery voltage with a multimeter. Replace the
battery if the battery voltage is too low.
Short circuit shutdown Disconnect the Battery Charger cables and check for
Battery Charger cable short or battery short. Charging
will resume when the short condition is corrected.
Battery slow to charge
or will not charge
Ensure that enough charging time has been allowed.
See CHARGING TIMES on page 7 for more information.
See PRE-CHARGE ACTIVATION on page 6.
Check if battery is sulfated.
Very cold battery. Charge rate will increase as battery
warms above 32°F (0°C).
Charger leads are not
connected properly
Unplug the battery charger and check that the charger
leads are connected properly. See page 6 and 7 for
instructions on connecting the charger leads to the
battery.

Related product manuals