Peavey CS 1200X

SPECIFICATIONS
Characteristics:
(@ 120 V AC, 60 Hz)
Output Power: (Typical Value)
Stereo mode, both channels driven
2 ohms, 1
kHz, 1% THD
4 ohms, 1
kHz, 1% THD
8 ohms, 1
kHz, 1% THD
Bridge mode, mono
4 ohms, 1
kHz, 1% THD
8 ohms, 1
kHz, 1% THD
Rated Output Power:
Stereo mode, both channels driven
4 ohms, 20 Hz to 20 kHz, 0.03% THD
8 ohms, 20 Hz to 20 kHz, 0.02% THD
Power Bandwidth: (Typical Value)
Stereo mode, both channels driven
@ rated power, 4 ohms, 0.1% THD
Slew Rate: (Typical Value)
Stereo mode, each channel
Bridge mode, mono
Total Harmonic Distortion: (Typical)
Stereo mode, both channels driven
20 Hz to 20 kHz, 4 ohm rated output
Input Sensitivity & Impedance:
Input attenuator set @ FCW
@ rated output power, 4 ohms
Dimensions & Weight:
Height
Width
Depth
Weight
900 W RMS per channel
630 W RMS per channel
390 W RMS per channel
1800 W RMS
1260 W RMS
600 W RMS per channel
350 W RMS per channel
10 Hz to 50 kHz
40 Volts per uSec
80 Volts per uSec
Less than 0.03%
1.4 V RMS (+3 dBV)
20 K ohms (+32 dB)
7” (17.8 cm)
19” (48.3 cm)
17” (43.2 cm)
65 lbs. (29.5 kg)
20