Peavey CS 400x

IO
SPECIFICATIONS
CHARACTERISTICS: <@ 120 V AC, 60 Hz)
Output Power: (Typical Value)
Stereo mode, both channels driven
2 ohms, 1 kHz, 1% THD
4 ohms. I kHz, 1% THD
8 ohms. 1 kHz, 1% THD
Bridge mode, mono
4 ohms. 1 kHz, 1 % THD
8 ohms. I kHz, 1% THD
Rated Output Power:
Stereo mode, both channels driven
4 ohms, 20 Hz to 20 kHz, 0.03% THD
8 ohms, 20 Hz to 20 kHz. 0.02% THD
Power Bandwidth: (Typical Value)
Stereo mode, both channels driven
<® rated power. 4 ohms, (0.1% THD)
Slew Rate: (Typical Value)
Stereo mode, each channel
Bridge mode, mono
Total Harmonic Distortion: (Typical)
Stereo mode, both channels driven
20 Hz to 20 kHz. 4 ohm rated output
Input Sensitivity & Impedance:
Input attenuator set @ FCW
<2> rated output power. 4 ohms
300 W RMS per chan
210 W RMS per chan
130 W RMS per chan
600 W RMS
420 W RMS
200 W RMS per chan
120 W RMS per chan
10 Hz to 50 kHz
40 Volts per uSec
80 Volts per uSec
Less than 0.03%
1.0 V RMS (OdBV)
20 K Ohms (+29 dB)