Peavey Valve King Series User Manual

7
Valve King™ Series 100/112/212
All Tube Amplifiers
Congratulations on the purchase of your new Valve King™ tube amplier from Peavey. The Valve King™ series offers more
all-tube “Bang For Your Buck” than any other amp on the market.
Two channels offer optimum exibility in a small package. The Clean channel includes a Bright switch and separate three-band
passive EQ, allowing the Lead tone to be even more ne-tuned.
The all new patent pending “Texture” control (Rear Panel), allows for total control over the power amp dynamics and level by
allowing for a “Class A” simulation or full power “Class A/B” operation…or anything in between!!! The Lead channel also in-
cludes a footswitchable Boost feature. This Boost may be selected for Gain, Volume, or both types simultaneously, via the front
panel switches. This capability emulates the third channel found on some other model amps and gives you the equivalent of a
third channel for the price of two. Both channels share a two-spring premium reverb pan and effects loop. An External Speaker
Jack and Resonance Switch are included to expand your playing options on the Valve King™ 112. The Valve King™ 212 and
Valve King™ 100 Head offer Resonance to Presence controls, for even more exibility.
Before you begin playing through your amplifier, it is very important to ensure that the product has the proper AC
line voltage supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the
rear panel of the unit. Each product feature is numbered. Refer to the front panel diagram in this manual to locate the
particular features next to it's number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FEATURES:
• 6L6GC power tubes and 12AX7 preamp tubes.
• Patent pending TEXTURE™ control.
• Two footswitchable channels with independent, three-band EQ.
• Footswitchable Gain/Volume Boost on the Lead channel.
• Global Resonance, Presence, and Reverb controls.
• Buffered Effects Loop.
• Paralleled Speaker Jacks (Head and Valve King™ 212 only).
• Spring Reverb with level control.
ENGLISH
VENTILATION: For proper ventilation, allow 24" clearance from nearest combustible surface.

Peavey Valve King Series Specifications

General

Type	Tube Amplifier
Channels	2
Speaker	12" (depending on the model)
Reverb	Yes
Effects Loop	Yes
Footswitch	Yes
Controls	Gain, Volume, Treble, Middle, Bass, Reverb
Footswitchable	Channel Select
Impedance	4, 8, 16 Ohms
Weight	Varies depending on the model
Dimensions	Varies depending on the model
Power Output	50W / 100W (depending on the model)