EasyManua.ls Logo

Peavey VYPYR PRO - Delay Menu

Peavey VYPYR PRO
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Activate the Deep Edit Menu by pressing and holding the Delay/Reverb Edit button for 2 seconds. is menu
is actually a series of 4 Sub Menus, including Delay, Reverb, Input and Output menus. Pressing the correspond-
ing Model encoder will activate the sub menu. In each menu, the Parameter Knobs are used to change settings.
In each menu the OUTER BANK WHEEL and INNER KNOB (except for the Reverb Menu) are also used for
various settings.
DELAY MENU
When the DELAY (Model 1) encoder is selected, the main LCD screen will display the Delay Type and Delay
Subdivision. e OUTER BANK WHEEL selects between Analog Delay, Digital Delay, Modulation Delay,
Multi-Tap Delay, Tape Delay and Tube Delay. e INNER KNOB selects between Quarter Note (default) and
Dotted Eighth Note. is corresponds to the delay setting in relation to what is set using the Tap Tempo Button.
Selecting Quarter Note will set the delay time to exactly what is tapped in. Selecting Dotted Eighth will set the
delay time to ¾ the tempo of what is tapped in. Use Dotted Eighth note when you want the same type of delay
used by David Gilmour or U2. To achieve this sound, you would play eighth notes in relation to the quarter
notes you have tapped in. With the Delay Level set at a high level, the delay will create a pleasing rhythmic pat-
tern that will be immediately familiar to you!
• Parameter Knob Functions:
•P1—Delay Time Shi. Aer tapping in the desired tempo using the Tap Tempo button, use this encod-
er to “ne tune” the delay time to match the desired setting.
•P2—Delay Level. is encoder sets the volume of the delay in relation to the dry guitar signal.
•P3—Delay Feedback. is encoder sets the length of the Delay Feedback.
•P4—is encoder controls a dierent parameter depending on which delay is chosen.
• Analog Delay—Delay Tone
• Digital Delay—Delay Tone
• Modulation Delay—Modulation Rate
• Multi-Tap Delay—Tap 1 Echo Position
• Tape Delay—Delay Tone
Tube Delay—Delay Tone
•P5—is encoder controls a dierent parameter depending on which delay is chosen.
• Analog Delay—N/A
• Digital Delay— N/A
• Modulation Delay—Modulation Depth
• Multi-Tap Delay—Tap 2 Echo Position
• Tape Delay—Tape Noise
• Tube Delay—Tube Drive
Deep Edit Menu

Other manuals for Peavey VYPYR PRO

Related product manuals