Peavey VYPYR PRO - LCD Display

FOOTSWITCH
MIDI OUT
(See Owner’s Manual)
from Amplifier
(Control to Amplifier)
MADE IN CHINA
DESIGNED AND ENGINEERED IN U.S.A.
A PRODUCT OF PEAVEY
ELECTRONICS CORPORATION
boost tap tempo rec/play stop
default
assigned
default
assigned
(hold to reset)(press during playback for overdub)(hold for tuner)
green = tuner
red = tap tempo
green = play/ovrdub
red = record
model 2 model 3 model 4 delay reverbmodel 1
2 3 41
down up
BANK
PRESETS
MODELS
LOOPER
SANPERA PRO
VYPYR
®
Top Panel
Le Expression Pedal
e default setting for this pedal is for a volume control, but it can be programmed to control any parameter.
Boost Switch
Provides a clean boost to the instrument signal path.
Tap Tempo
Tapping this switch will allow you to set the tempo of the delay eect. Holding the switch down will activate the
onboard tuner.
LCD Display
Displays information about the presets and other parameters.
Looper Controls
ese two switches allow for recording, playback and overdubbing through the onboard looper. A complete
description of the Looper feature can be found on page 24.
Right Expression Pedal
e default setting for this pedal is for Wah, but it can be programmed to control multiple parameters.
Model Selectors
ese four switches allow you to select one of four models within the Preset.
Bank Selectors
ese two switches allow you to scroll through the Vypyr Pro’s Preset Banks.
Preset Selectors
ese selectors allow easy access to your favorite presets.
1
6 7 8 9
2
3 4 5 6
1
2
3
4
5
6
7
8
9