Pegasus FS700 Series User Manual

INSTRUCTIONS
FS700
Series
4-needle, feed-off-the-arm, interlock stitch machine
Thank you very much for purchasing Pegasus FS700
Series machine.
This instruction manual describes daily routine
maintenance and safety precautions to keep the
machine in the best possible conditions.
Please study this manual very carefully before operating
the machine.
From the library of: Superior Sewing Machine & Supply LLC

Pegasus FS700 Series Specifications

General

Brand	Pegasus
Model	FS700 Series
Category	Sewing Machine
Language	English

Summary

Introduction to Machine Operation

Hazard Indications and Signal Words

Explains symbols and signal words indicating hazard levels for safe operation.

General Safety Precautions

Safe Operating Environment

Guidelines on safe operating environments and conditions to avoid.

Safety Measures for Operation and Maintenance

Essential safety measures for machine maintenance and daily operation.

Notes for Specific Procedures

Pre-Operation Checks and Setup

Essential checks before operating the machine for the first time or daily.

Machine Oil Handling Safety

Pre-Operation Checks and Setup

Operational Safety Precautions

Machine Safety Protectors

Eye Guard Protection

Ensures eye protection from broken needles or flying debris during sewing.

Finger Guard Protection

Protects fingers from accidental contact with the moving needle.

Belt Cover Safety

Protects users from fast-moving pulleys and belts.

Motor Cover Protection

Presser Foot Safety Precautions

Needle Bar Cap Protection

Thread Take-up Cover Protection

Table-Mounted Head Installation

Pedestal-Mounted Machine Installation

Machine Lubrication Procedures

Oil Specification and Filling

Filling Machine Oil Reservoir

Correct Oil Level Maintenance

Oil Circulation Check

Machine Threading Procedure

Threading Diagram and Path

Presser Foot Pressure Adjustment

Presser Foot Height Adjustment

Differential Feed Ratio Adjustment

Stitch Length Adjustment

Thread Tension Adjustment

Needle Replacement Procedure

Knife Replacement and Adjustment

Upper Knife Replacement

Lower Knife Replacement

Machine Oil Replacement Schedule

Draining Old Machine Oil

Needle Guard Adjustment

Needle Thread Guide Adjustment

Needle Thread Presser Spring Adjustment

Looper Thread Take-Up Adjustment

Looper Thread Guide Adjustment

Looper Thread Guides Adjustment

Top Cover Thread Take-Up Adjustment

Top Cover Thread Guide Adjustment

Hook Adjustment Procedure

Carrier Adjustment Procedure

Presser Foot Replacement

Presser Foot Removal

Presser Foot Reinstallation

Needle Height Adjustment

Looper Adjustment

Looper-Needle Distance Adjustment

Looper Front-to-Back Position

Rear Needle Guard Adjustment

Looper Guard Adjustment

Feed Dog Height Adjustment