ECP200 EXPERT
INTRODUCTION
Page 3 1.1 General
Page 4 1.2 Product ID codes
Page 4 1.3 Overall dimensions
Page 4 1.4 Identification data
INSTALLATION
Page 5 2.1 Important information for the installer
Page 5 2.2 Standard assembly kit
Page 6 2.3 Installing the unit
TECHNICAL CHARACTERISTICS
Page 8 3.1 Technical characteristics
WARRANTY
Page 9 4.1 Warranty
PARAMETER PROGRAMMING
Page 10 5.1 Control panel
Page 10 5.2 Frontal keypad
Page 11 5.3 LED display
Page 12 5.4 General
Page 12 5.5 Key to symbols
Page 12 5.6 Setting and displaying set points
Page 13 5.7 Level 1 programming
Page 13 5.8 List of Level 1 variables
Page 14 5.9 Level 2 programming
Page 14 5.10 List of Level 2 variables
Page 16 5.11 Switching on the ECP200 EXPERT electronic controller
Page 16 5.12 Compressor activation/deactivation conditions
Page 16 5.13 Manual defrosting
Page 17 5.14 Hot gas defrosting
Page 17 5.15 Pump down function
Page 17 5.16 Password protection
OPTIONAL
Page 18 6.1 TeleNET monitoring / supervision system
Page 18 6.2 Net configuration with Modbus-rtu protocol
Page 19 6.3 ALARM RELAY / RS485 switching
TROUBLESHOOTING
Page 20 7.1 Troubleshooting
APPENDICES
Page 21 A.1 EC declaration of conformity
Page 22 A.2 ECP200 EXPERT wiring diagram
Page 23 A.3 Part list
CONTENTS
CHAP. 1
CHAP. 2
CHAP. 3
CHAP. 4
CHAP. 5
CHAP. 6
CHAP. 7
ENGLISH
To Next Page
Loading...
Need help?
General
