Pego PLUS 200 2 PLT User Manual

PLUS 200 2 PLT
Page 3
Rev. 02-06 MANUALE D’USO E MANUTENZIONE
INTRODUCTION
Page 4 1.1 General
Page 4 1.2 Product ID codes
Page 5 1.3 Overall dimensions
Page 5 1.4 Identification data
INSTALLATION
Page 6 2.1 Important information for installer
Page 6 2.2 Standard assembly and use kit
FUNCTIONS
Page 7 3.1 Functions managed by the Plus 200 2 PLT
TECHNICAL CHARACTERISTICS
Page 8 4.1. Technical characteristics
Page 9 4.2 Warranty terms
PARAMETER PROGRAMMING
Page 10 5.1 Panel layout
Page 11 5.2 Keypad functions
Page 12 5.3 LCD display
Page 13 5.4 General
Page 13 5.5 Key to symbols
Page 13 5.6 Setting and displaying the set-points
Page 14 5.7 Level 1 programming
Page 15 5.8 List of Level 1 variables
Page 16 5.9 Level 2 programming
Page 17 5.10 List of Level 2 variables
Page 19 5.11 Switching on the PLUS 200 2 PLT electronic controller
Page 19 5.12 Compressor activation/deactivation conditions
Page 19 5.13 Configurations
Page 19 5.14 Single set-point with double system
Page 19 5.15 Double set point
Page 20 5.16 Manual defrosting
Page 20 5.17 Hot gas defrosting
Page 20 5.18 Changing the date / time settings
TROUBLESHOOTING
Page 21 6.1 Troubleshooting guide
APPENDICES
Page 23 A.1 EC declaration of conformity
Page 24 A.1 PLUS200 2 PLT connection diagram
CONTENTS
CHAP. 1
CHAP. 5
CHAP. 6
CHAP. 2
CHAP. 3
CHAP. 4

Pego PLUS 200 2 PLT Specifications

General

Brand	Pego
Model	PLUS 200 2 PLT
Category	Controller
Language	English