Pego PLUS 200 2 PLT User Manual

PLUS 200 2 PLT
Page 7
Rev. 02-06 MANUALE D’USO E MANUTENZIONE
FUNCTIONS CONTROLLED BY THE PLUS200 2 PLT
- Display and adjustment of room temperature
- Display of evaporator 1 and evaporator 2 temperature
- System control activation/deactivation
- Operation with single set-point and control of two motor condensing units with delays
between the two parameter-set starts.
- Compressor rotation (to make wear uniform)
- Operation with double set point for gradual application of refrigerating power
- System warnings (temperature sensor error, min-max temperature alarms, compressor
1 and compressor 2 safety devices)
- Evaporator 1 and evaporator 2 fan control
- Automatic/manual defrost control (static, with elements, cycle inversion)
- Clock for real time clock defrosting of the two evaporators simultaneously or separately
(even where defrosting cycle is set simultaneously the end-of-defrost temperature and
control of fan start delay on the two evaporators are independent)
- Room light can be switched on with on-panel key or door switch
- Alarm relay
CHAP. 3 - Functions
CHAPTER 3: FUNCTIONS
3.1

Pego PLUS 200 2 PLT Specifications

General

Brand	Pego
Model	PLUS 200 2 PLT
Category	Controller
Language	English