What to do if my Pelgrim GVWC290L/P03 Dishwasher has spots on silver?
To avoid marks and tarnishing on silver in your Pelgrim dishwasher, separate dishes made from different metals, such as silver, stainless steel, and aluminum.
What to do if my Pelgrim GVWC290L/P03 Dishwasher salt compartment is empty?
If the salt compartment is empty in your Pelgrim dishwasher, top up with salt.
How to fix F52 error on Pelgrim GVWC290L/P03?
To fix F52 error on your Pelgrim dishwasher, caused by a water level fault: * Clean the coarse and fine filters. * Check that the outer filter on the inlet hose is not blocked.
How to fix dishes that are not clean in Pelgrim GVWC290L/P03?
If your Pelgrim dishwasher isn't cleaning dishes properly, consider these possibilities: * Make sure dishes aren't blocking the spray arms. * Clean the spray arms if the holes or bearings are blocked. * Select a more intensive program like Intensive 70° for greasy dishes. * Adjust the detergent dosage based on water hardness; too much or too little detergent can affect cleaning.
How to fix Pelgrim GVWC290L/P03 Dishwasher if the dishes are not dry enough?
If your Pelgrim dishwasher leaves dishes not dry enough, consider the following: * Activate the Combi drying option. * Ensure the dishwasher is fully loaded. * Top up the rinse aid or increase its dosage setting. * If using all-in-one detergents with the TAB setting activated, switch detergents or deactivate the TAB setting and add salt and separate rinse aid.
Why are there spots or films on the dishes in my Pelgrim GVWC290L/P03?
If you notice spots or films on dishes from your Pelgrim dishwasher, check these: * Adjust the rinse aid dosage setting. * If using all-in-one detergents with the TAB setting activated, switch to separate detergents or deactivate the TAB setting and add salt and rinse aid. * Ensure the salt compartment is full.
How to get rid of bad odour in Pelgrim GVWC290L/P03 Dishwasher?
If there's a bad odor in your Pelgrim dishwasher: * Clean around the seals and in corners with a washing-up brush and low foaming cleaner. * If you've been using low-temperature programs for a long time, run a high-temperature program once or twice a month.
How to remove grease deposits in Pelgrim GVWC290L/P03?
To address grease deposits in your Pelgrim dishwasher, select a program with a high temperature to dissolve grease on very dirty dishes, such as Intensive 70°.
How to prevent spots on stainless steel or silver in Pelgrim GVWC290L/P03?
To prevent spots on stainless steel or silver in your Pelgrim dishwasher: * Rinse off foods like mustard, mayonnaise, lemon, vinegar, salt, and dressings if you're not starting the dishwasher immediately. Consider using the 1h 65° program with the Speed wash option. * Separate dishes made from different metals, such as silver, stainless steel, and aluminum, to avoid contact during washing.
Why is there detergent residue in the detergent compartment of my Pelgrim GVWC290L/P03?
If you find detergent residue in the compartment of your Pelgrim dishwasher after washing: * Ensure the detergent compartment is dry when adding detergent. * Check that dishes aren't blocking the detergent compartment from opening.
General| Type | Freestanding |
|---|---|
| Number of programs | 5 |
| Noise level | 49 dB |
| Number of place settings | 13 |
| Energy Efficiency Class | A++ |
| Capacity | 13 place settings |
| Annual Water Consumption | 2520 L |
| Drying Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | No |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
To Next Page