How to fix F12 error on Pelgrim GVWC290L/P03?
To address an F12 error on your Pelgrim dishwasher due to a water inlet fault: * Ensure the water tap is turned on. * Check the inlet hose's outer filter for blockages.
What to do if Pelgrim GVWC290L/P03 Dishwasher shows F40 error?
To address the F40 error on your Pelgrim dishwasher due to inlet valve leakage, turn off the water tap.
How to fix F41 error on Pelgrim GVWC290L/P03?
To address the F41 error (Heater fault 1) on your Pelgrim dishwasher, turn off the water tap and remove the plug from the wall socket.
What to do if Pelgrim GVWC290L/P03 shows F54 error?
To address the F54 error on your Pelgrim dishwasher, caused by overfilling water, turn off the water tap. Do not remove the plug from the wall socket until the water tap on the supply line has been turned off to avoid water leakage.
What to do if my Pelgrim GVWC290L/P03 Dishwasher water softener is leaking salt?
General| Type | Freestanding |
|---|---|
| Number of programs | 5 |
| Noise level | 49 dB |
| Number of place settings | 13 |
| Energy Efficiency Class | A++ |
| Capacity | 13 place settings |
| Annual Water Consumption | 2520 L |
| Drying Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | No |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
To Next Page