How to remove sticky white or blue film from dishes in Pelgrim Dishwasher?
If your dishes have a sticky white or blue film after washing in your Pelgrim dishwasher, reduce the rinse aid dosage. If you have very soft water, consider diluting the rinse aid 50:50 with water.
Why my Pelgrim GVWC290L/P03 Dishwasher does not start?
If your Pelgrim dishwasher isn't starting, there are several potential causes: * Ensure the start button has been pressed, and the display is counting down. * Verify the door is completely closed. * If you opened the dishwasher mid-cycle, close the door and wait for the program to resume. * Check that the door lock clicks into place; if not, open the door, press and hold the Combi drying button until the display counts down, then close the door again. * If the Delayed start option is active, press and hold the button for three seconds to cancel it. * Confirm that the plug is securely in the wall socket. * Check for tripped fuses or circuit breakers.
What to do if I cannot close the door of my Pelgrim Dishwasher?
If you cannot close the door of your Pelgrim dishwasher: * Make sure that the baskets are correctly positioned horizontally. * If the door lock doesn't click, open the door, press and hold Combi drying until the display counts down, wait until it ends, and then close the door again to see if it locks.
Why the control panel of my Pelgrim Dishwasher does not react when pressed?
If the control panel of your Pelgrim dishwasher isn't responding: * Wait a moment before trying again if you've just opened the door. * Ensure the door is open, as the control panel only works when the door is open. * Clean the control panel with a dry or slightly damp cloth.
What causes rattling sound when dishwashing in Pelgrim GVWC290L/P03 Dishwasher?
If you hear a rattling sound while your Pelgrim dishwasher is running, check that the dishes are placed securely and that the spray arms can rotate freely.
What to do if software update failed on Pelgrim Dishwasher?
If a software update fails on your Pelgrim dishwasher, ensure that the power supply is stable and the network connection is consistent before trying again.
How to fix WiFi connection failed on Pelgrim Dishwasher?
To fix a failed WiFi connection on your Pelgrim dishwasher: * Check that your router is connected to the internet. * Ensure your wireless network uses 2.4 GHz and is visible. If the signal is weak, move the router closer to the dishwasher.
Why the network symbol does not appear on the display of my Pelgrim Dishwasher?
If the network symbol isn't showing on your Pelgrim dishwasher's display: * Connect the dishwasher to your wireless network. * Activate the WiFi connection.
How to fix pairing failed on Pelgrim GVWC290L/P03?
To resolve pairing issues with your Pelgrim dishwasher: * Check that the router is connected to the internet.
How to fix F10 error on Pelgrim GVWC290L/P03 Dishwasher?
To fix F10 error on your Pelgrim dishwasher caused by overfilling water, unblock the drainage pump.
General| Type | Freestanding |
|---|---|
| Number of programs | 5 |
| Noise level | 49 dB |
| Number of place settings | 13 |
| Energy Efficiency Class | A++ |
| Capacity | 13 place settings |
| Annual Water Consumption | 2520 L |
| Drying Class | A |
| Delay Start | Yes |
| Half Load Option | Yes |
| Child Lock | No |
| Dimensions (HxWxD) | 85 x 60 x 60 cm |
To Next Page