22 23|
SETTING UP YOUR TREAD
LEVELLING
1 Use a 27 mm spanner or an adjustable spanner to loosen the nut at the top of
each back leg.
2 Turn one or both feet clockwise until all feet rest rmly on the ground.
3 Tighten the locking nuts.
y Make sure to power down and unplug the Tread before moving it.
y One person stands at front, holding the handrail.
y One person lifts from the back.
y Tilt the Tread forward.
y Slowly and carefully roll the Tread backwards or forwards.
For more information on transporting the Tread to a new location, contact
member support.
CAUTION: Do not attempt to move the Tread with fewer than two people.
MOVING THE TREAD
SETTING UP YOUR TREAD CONTINUED
If the Tread rocks or wobbles, stabilise it by adjusting the back feet.
1
2
To Next Page
Loading...
