Peloton Tread TR02 - Maintenance and Care; Maintenance Schedule

37|
MAINTENANCE AND CARE
36
MAINTENANCE AND CARE
Always power down and unplug the Tread before cleaning or performing maintenance.
The safety and integrity of the Tread can only be maintained when it is regularly examined
for damage and repaired.
It is the owner’s sole responsibility to ensure that regular maintenance is performed.
Replace worn or damaged parts immediately. Do not use the Tread until repairs are made.
Use only original parts from Peloton. Changes or modications to this unit not expressly
approved by Peloton could void the warranty, result in damage to the Tread, or cause injury
to the user.
Service other than the procedures described here must be performed by an
authorised technician.
Before every class:
MAINTENANCE SCHEDULE
Weekly:
y Clean Tread surfaces.
y Check power cord for damage.
y Clean the area underneath the Tread.
y Check the area around and underneath the Tread for potential obstructions.
WARNINGS AND SAFETY INSTRUCTIONS
CLEANING THE TREAD
y Clean the Tread regularly for optimal performance and longevity.
y Clean surfaces with a damp cloth and mild, soapy water.
y Never use abrasive cleaners.
y Never spray or pour liquid directly on Tread surfaces. Never allow liquid to drip into
any opening on the Tread.
y Always power off and unplug the Tread before cleaning.
y Check the entire Tread for wear and damage.
y Test the Safety Key by pulling it out while walking on the Tread.
y Make sure the belt is centered.
Every 3 years:
y Lubricate the belt.