24 25|
SETTING UP YOUR TREAD
SETTING UP YOUR TREAD CONTINUED
STORAGE
y Store the Tread in a dry, indoor area.
y Remove the Safety Key and store it in a separate location when the Tread is not in use.
y To reattach the Safety Key, t the magnet into the notch under the center button. Wrap
the cord around the cleat twice and place the clip on the magnet.
1 Plug in the power cord.
2 Switch the Tread on.
3 Press the center button to wake the Tread.
POWERING OFF
1 Press and hold the center button.
2 Switch the Tread off.
PLUGGING IN AND POWERING ON
WARNING: Always switch power off, unplug the Tread, and remove the Safety Key
before cleaning and when the Tread is not in use.
To Next Page
Loading...
