48 49|
ASSEMBLY
4949
ASSEMBLY CONTINUED
20 21
18 Fasten the (2) screws using a stubby
Phillips head screwdriver. Ensure the
screws are ush with the bracket.
19 Reinstall the fabric panel.
20 Rotate the touchscreen through its full
range of motion to ensure the USB-C
cable has enough slack.
21 Install the neck cover.
22 Plug in and power on.
23 The Home Installer App will
run automatically and perform
speed and incline calibration.
24 Remove the Safety Key. Store the
Safety Key away from the Tread and
out of the reach of children.
To Next Page
Loading...
