6 7|
MEMBER SUPPORT
WARNINGS AND
SAFETY INSTRUCTIONS
CONTINUED
Use only original parts from Peloton.
Unauthorised changes or modications to
this equipment could damage the Tread,
impair its operation, void your warranty, and
result in serious injury.
Do not attempt to service the Tread
yourself other than performing the
basic maintenance described in this
manual. Service other than basic
maintenance should be performed by
authorised personnel.
Keep hands away from moving parts.
Never touch the moving belt or reach
under the Tread while it is powered on.
Never put items under the deck.
Never operate the Tread if it isn’t working
properly, or if the power cord has been
damaged. Keep power cord away from
heated surfaces, sharp edges, and water.
Do not attempt to transport the Tread with
fewer than two people.
Do not start the Tread before stepping onto
the running surface.
SAVE THESE INSTRUCTIONS.
MEMBER SUPPORT
Member satisfaction is a top priority for
Peloton. If you require assistance or are
experiencing issues with your Peloton
Tread, please vist support.onepeloton.co.uk
for additional help.
When you contact member support, have
the following information ready:
1 Tread ID/serial number
*
2 Purchase Date
3 Your order number or the email address
associated with your Tread purchase
To access the Tread ID/serial number
from the touchscreen, tap the menu icon
at the lower right, and select About.
*
Cleaning: Always switch power off, unplug
the Tread, and remove the Safety Key
before cleaning and when the Tread is not
in use. Do not soak or spray Tread surfaces
with liquid. Clean using a damp cloth.
To Next Page
Loading...
