8-16 Command Reference
:CALCulate :LIMit :CLEar
Clear Limit Failure Count
The command resets the counter that reports its result over the
:CALCulate:LIMit:FCOunt? query command.
:CALCulate :LIMit :CLEar :AUTO
8 <Boolean>
Automatic Reset of Limit Failure Count
The command activates (ON) or deactivates (OFF) automatic reset by :INIT of
the counter that reports its result over the :CALCulate:LIMit:FCOunt? query
command.
Parameters <Boolean> = ( 1/ON | 0/OFF )
*RST condition: OFF
To Next Page
Loading...
