8-130 Command Reference
*EMC
8<Decimal data>
Enable Macros
This command enables and disables expansion and execution of macros. If mac
-
ros are disabled, the instrument will not recognize a macro although it is defined in
the instrument. (The Enable Macro command takes a long time to execute.)
Parameters:
<Decimal data> = is 0 or 1. A value which rounds to 0 turns off macro execution. Any other
value turns macro execution on.
+
Note that 1 or 0 is <Decimal data>, not <Boolean>!
ON|OFF is not allowed here!
Returned format: «1|0» ¿
1 indicates that macro expansion is enabled.
0 indicates that macro expansion is disabled.
Example:
SEND®
*EMC 8 1
Enables macro expansion and execution.
Complies with standards: IEEE 488.2 1987.
To Next Page
Loading...
