8-22 Command Reference
:CALCulate :MATH :STATe
8 <Boolean>
Enable Mathematics
Switches on/off the mathematical function. Note that the CALCulate subsystem is
automatically enabled when MATH operations are switched on. This means that
other enabled calculate sub-blocks are indirectly switched on. Switching off mathe
-
matics, however, does not switch off the CALCulate subsystem.
Parameters:
<Boolean> = ( 1/ON | 0/OFF )
Returned format: 1|0
Example
SEND®
:CALC:MATH:STAT 8 1
This example switches on mathematics.
*RST condition: OFF
Complies with standards: SCPI 1991.0, confirmed.
:CALCulate :STATe
8 <Boolean>
Enable Calculation
Switches on/off the complete post-processing block. If disabled, neither mathemat-
ics or limit-monitoring can be done.
Parameter
<Boolean> = ( 1/ON | 0/OFF )
Example
SEND®
:CALC:STAT 8 1
Switches on Post Processing.
Returned format: 1|0¿
*RST condition: OFF
Complies with standards: SCPI 1991.0, Confirmed
To Next Page
Loading...
