Penlon Prima 465 User Manual

User Manual
ANAESTHESIA SOLUTIONS
Prima 465 Anaesthetic Machine

Penlon Prima 465 Specifications

General

Model	Prima 465
Manufacturer	Penlon
Gas Supply	O2, N2O, Air
Oxygen Flush	Yes
CO2 Absorber	Yes
Nitrous Oxide Flow Range	0 to 10 L/min
Power Supply	220-240V AC, 50/60Hz
Type	Anaesthesia Workstation
Ventilator	Electronic Piston Ventilator (Ascalon 465)
Vaporizer Compatibility	Penlon vaporizers

Summary

Warnings and Cautions

General Warnings

Specific warnings about system usage, hazards, and prohibitions.

General Cautions

Specific cautions to prevent damage, ensure proper use, and avoid cross-contamination.

Purpose of the Anaesthetic Machine

Intended Use and Application

Describes the device's intended use, application, and patient population.

Contraindications

Lists conditions under which the device should not be used.

Description of the Prima 465

General Construction and Mobility

Details the machine's frame, mobility features, and mounting system.

Gas Circuit Components

Explains gas inlet filters, blocks, and safety devices.

Gas Circuit Controls

Describes the anaesthesia system switch and electronic flow mixer.

Gas Outlets and Controls

Explains auxiliary CGO, alternate O2 supply, and O2+ flush.

Pressure Gauges and Flowmeters

Details cylinder/pipeline gauges and auxiliary oxygen flowmeter.

Vaporizer System

Covers vaporizer mounting, Selectatec compatibility, and interlock systems.

Control Panel Overview

Explains the layout and functions of the control panel buttons and indicators.

Electrical Power Supply

Details mains power, circuit breaker, and auxiliary sockets.

Battery System

Covers battery specification, charging, and replacement.

Alarm System

Explains the alarm system, indicators, and messages.

Absorber System

Details the absorber canister, sensors, and valves.

Ventilator System

Describes various ventilator modes and their functions.

Patient Monitoring Parameters

Lists the measured parameters displayed for patient monitoring.

Specifications of the Prima 465

Physical Dimensions and Gas Supplies

Lists physical dimensions, weight, and gas supply types.

Gas Supply Pressure and Flow Rates

Specifies pressures and flow rates for gas supplies.

Auxiliary Gas Outlets and Oxygen Flush

Details auxiliary outlets, oxygen flush, and fresh gas mixture.

Environmental and Electrical Specifications

Lists environmental conditions and electrical supply details.

Ventilator and Breathing System Specifications

Specifies parameters for the ventilator and breathing system.

Alarm Settings

Lists alarm types, their ranges, and settings.

Device Classification and Labelling

Details device classification and labelling requirements.

Installation and Pre-use Checks

Installation and Commissioning

Covers initial setup and commissioning of the device.

Absorber Assembly Installation

Instructions for installing the absorber assembly and canister.

Component Installations

Guides installation of bag arm, O2 sensor, and multigas module.

Vaporizer and Gas Supply Installation

Steps for installing vaporizers and connecting gas supplies.

Electronic Gas Mixer Operation

Details operation of the electronic gas mixer.

Electrical Power and AGSS Connection

Steps for connecting power and AGSS.

Pre-use Test Schedule and Visual Inspection

Outlines pre-use testing and visual inspection procedures.

Start Up Test

Procedure for performing the system start-up test.

Pipeline Gas Supply Tests

Procedures for testing oxygen, N2O, and air pipeline supplies.

Oxygen Fresh Gas Supply Check

Procedure to check the oxygen fresh gas supply.

Cylinder Gas Supplies

Instructions for connecting and checking cylinder gas supplies.

Vaporizer Tests

Procedures for testing vaporizer back pressure and interlock system.

Alarm Tests

Procedures for testing various alarms including O2, MV, and pressure.

Breathing Circuit Tests

Tests for APL valve, non-return valves, and bellows.

Oxygen Flush Test

Procedure for testing the oxygen flush function.

Preoperative Procedure

Steps to prepare the system before connecting a patient.

Operating the Anaesthesia System

Ventilation Modes

Explains different ventilation modes and their operation.

Volume Control Ventilation (VCV) Mode

Details VCV mode operation, description, and parameters.

Pressure Control Ventilation (PCV) Mode

Details PCV mode operation, description, and parameters.

Pressure-Regulated Volume Control (PRVC) Mode

Details PRVC mode operation, description, and parameters.

SIMV-V Mode

Details SIMV-V mode operation, description, and parameters.

SIMV-P Mode

Details SIMV-P mode operation, description, and parameters.

SIMV-PRVC Mode

Details SIMV-PRVC mode operation, description, and parameters.

SPONT/PSV Mode

Details SPONT/PSV mode operation, description, and parameters.

Standby Mode Operation

Explains how to enter and exit standby mode and its features.

Home Screen Navigation

Describes the main home screen layout and its fields.

Function Fields Access

Explains access to menu structures like Ventilation Modes and Controls.

Monitoring Parameters Display

Details the monitoring screen, parameters, and values.

Trends Review

Explains how to use trend graphs to review parameter values over time.

Alarm Management

Explains how alarms are triggered and how to set alarm limits.

Alarm Limits Display

Displays limits for mechanical, gas, and SpO2 monitoring alarms.

System Settings and Calibration

Accesses system settings like Info, Settings, Date & Time, and Calibration.

Ventilator and Fresh Gas Settings

Quick access to ventilator settings and fresh gas displays.

Waveform Field Displays

Explains how to access and interpret default waveforms.

Measured Values Display

Displays key and general parameters, optional gas fields, and alarm status.

Alarm Message Field Details

Explains alarm indications, types, and visual/audible cues.

Clinical Alarms

Lists clinical alarms, priority, cause, and recommended actions.

Technical Alarms

Lists technical alarms, priority, cause, and recommended actions.

System Prompt Messages

Explains prompt messages, patient type icons, and power status.

Ventilation Mode Selection

Explains how to use bag and mechanical ventilation modes.

Monitoring Parameters

Details FiO2, pressure, tidal volume, and respiratory rate monitoring.

Absorber Operations

Procedures for draining condensate and changing CO2 absorbent.

System Shut-down Procedure

Steps to safely shut down the anaesthesia system.

Maintenance Procedures

User Maintenance Guidelines

Defines user maintenance tasks, limited to cleaning external surfaces.

Servicing and Repair Policy

Emphasizes that servicing must be done by trained engineers.

Recommended Service Schedule

Outlines the recommended service schedule for the machine.

Cleaning and Disinfection

Instructions for cleaning and disinfecting the machine and its components.

Absorber and Breathing System Components

Procedures for removing absorber and breathing system components.

Component Reassembly

Procedures for reassembling absorber and breathing system components.

AGSS Receiver Unit Service

Cleaning and service recommendations for the AGSS receiver unit.

Breathing System Sensor Calibration

Procedures for pressure and flow sensor zeroing.

Flowmeter Zero Calibration

Steps to calibrate the flowmeter zero.

Oxygen Monitor Calibration

Procedures for calibrating the oxygen monitor.

Water Trap and Battery Replacement

Instructions for water trap replacement and battery replacement.

Fault Diagnosis and Troubleshooting

Table of common faults, possible causes, and actions.

Appendices

References and Disposal Information

Lists standards, trademarks, and disposal guidelines.

Optional Extras and Accessories

Lists optional accessories and contact information for sales.

Device Labelling Explained

Explains various labels and symbols used on the device.

Gas Circuit Diagram

Diagram and legend of the gas circuit.

Sidestream Gas Monitoring Module

Warnings and cautions for using the sidestream gas monitoring module.

Electromagnetic Compatibility (EMC)

Declaration and guidance on electromagnetic compatibility.

Anaesthetic Gas Module Operation

Guides on operating the anaesthetic gas module.

Gas Module Maintenance and Alarms

Maintenance guidelines and specific alarms for the gas module.