To Next Page
C
chambersjuliaJul 27, 2025
What to do if my Pentair Water Dispenser softener fails to draw brine?
- SshieldskaitlinJul 27, 2025
If your Pentair Water Dispenser softener isn't drawing brine, consider the following: * The drain line flow control might be plugged, you should clean the drain line flow control. * The injector could be plugged; clean the injector. * The injector screen might be plugged; clean the screen. * The line pressure may be too low; increase the line pressure to 20 psi. * There could be an internal control leak; change the seals, spacers, and piston assembly. * The service adapter might not have cycled; check the drive motor and switches.
General
