What to do if my Pentair Water Pump flow meter shows continuous flow error?
The error will clear when the flow to the meter rises above 0.5 GPM or 1 Lpm. If continuous flow is expected, turn plumbing leak detection off in Master Settings. Otherwise, check for piping leaks.
What to do if Pentair Water Pump optical sensor detects undesired change?
This is typically a non-critical error, indicating an extra optical sensor pulse was detected. Press the Regeneration button to advance the motor and clear the error. This occurs because an undesired optical sensor state change occurred.
General| Brand | Pentair |
|---|---|
| Model | FOLEO 5800 XTR |
| Category | Water Dispenser |
| Language | English |
Settings related to the initial installation of the unit.
Settings related to the water flow and pressure within the system.
Settings related to the electrical components and power supply.
Settings related to the unit's operational software and cycles.
Defines the purpose and audience of the user guide.
Tracks revisions, dates, authors, and descriptions of document changes.
Provides manufacturer details and the specific product model.
Lists the directives and technical standards the product complies with.
Identifies the location of serial and safety labels on the unit.
Warns about potential risks and the importance of following safety instructions.
Details preliminary checks, storage, and assembly for hygiene.
Advises on water quality and sodium content considerations.
Provides detailed technical data and ratings for the softener.
General overview of the softener model and its components.
Details flow rate performance under various conditions.
Compares softener capacity and salt usage across different models and settings.
Explains the function and adjustment of the water mixing device.
Covers general guidelines for selecting the installation location and conditions.
General advice and requirements for the installation environment.
Details how to connect the softener to the plumbing system.
Illustrates the recommended layout for connecting the softener.
Specifies how to make water supply connections, including thread sealing.
Overview of the main interface, control buttons, and status indicators.
Shows the interface and information displayed during normal water treatment.
Illustrates the display interface and status during the regeneration process.
Instructions for initiating a manual regeneration cycle.
Outlines the requirements for regular system checks and inspections.
Specific steps for cleaning and disinfecting the system.
Guidance on refilling the brine tank with salt.
To Next Page
