User Guide Foleo
Ref. MKT-UG-038 / D - 15.11.2019 5 / 116
EN
1.5. Limitation of liability
Pentair Quality System EMEA products benefit, under specific conditions, from a manufacturer warranty that may be invoked
by Pentair’s direct customers. Users should contact the vendor of this product for applicable conditions and in case of a
potential warranty claim.
Any warranty provided by Pentair regarding the product may become invalid in case of:
• installation done by a non-water-professional;
• improper installation, improper programming, improper use, improper operation and/or maintenance leading to any kind
of product damages;
• improper or unauthorized intervention on the controller or components;
• incorrect, improper or wrong connection/assembly of systems or products with this product and vice versa;
• use of a non-compatible lubricant, grease or chemicals of any type and not listed by the manufacturer as compatible for the
product;
• failure due to wrong configuration and/or sizing.
Pentair accepts no liability for equipment installed by the user upstream or downstream of Pentair products, as well as for
process/production processes which are installed and connected around or even related to the installation. Disturbances,
failures, direct or indirect damages that are caused by such equipment or processes are also excluded from the warranty.
Pentair shall not accept any liability for any loss or damage of profits, revenues, use, production, or contracts, or for any indirect,
special or consequential loss or damage whatsoever. Please refer to the Pentair List Price to know more about terms and
conditions applicable to this product.
2 . Safety
2.1. Serial and safety tags location
Note
Ensure that the serial label and the safety tags on the device are completely legible and clean. If
necessary, replace them with new tags and put them in the same places.
2.2. Hazards
All the safety and protection instructions contained in this document must be observed in order to avoid temporary or
permanent injury, damage to property or environmental pollution.
At the same time, any other legal regulations, accident prevention and environmental protection measures, as well as any
recognized technical regulations relating to appropriate and risk-free methods of working which apply in the country and place
of use of the device must be adhered to.
Any non-observation of the safety and protection rules, as well as any existing legal and technical regulations, will result in a
risk of temporary or permanent injury, damage to property or environmental pollution.
Model
Electrical rating
Part number
Serial number
Production date
Production order
To Next Page
Loading...
