What to do if my Pentair Water Pump flow meter shows continuous flow error?
The error will clear when the flow to the meter rises above 0.5 GPM or 1 Lpm. If continuous flow is expected, turn plumbing leak detection off in Master Settings. Otherwise, check for piping leaks.
What to do if Pentair Water Pump optical sensor detects undesired change?
This is typically a non-critical error, indicating an extra optical sensor pulse was detected. Press the Regeneration button to advance the motor and clear the error. This occurs because an undesired optical sensor state change occurred.
General| Brand | Pentair |
|---|---|
| Model | FOLEO 5800 XTR |
| Category | Water Dispenser |
| Language | English |
To Next Page
