Installer Manual Foleo - Programming
Ref. MKT-IM-038 / C - 15.11.2019 45 / 112
5.3.1. Format screen
After plugging in the unit for the first time, the format screen is displayed.
NOTE
Happens until Assistance Name is set.
Press the language button and use the arrows to adjust the system's displayed language to
English.
Press the units button and use the arrows to adjust the system's units of measure in metric.
Press the hardness units button and use the arrows to adjust the system's hardness units of
measure: mg/L eq CaCO
3
or ppm, German degrees, French degrees, or Clark degrees.
Press to validate the selection and move to the assistance name screen.
5.3.2. Assistance name screen
Using the keypad, enter the name of the water treatment professional or company that the
homeowner may call for system service (optional).
To enter a letter using the keypad, quickly press the keypad button the number of times that
correspond with the position of the correct letter on the button. For example, to enter the letter "c",
quickly press the abc button three times.
Press to validate the selection and move to the assistance phone screen.
Format
language
units
hardness units
english
metric
mg/L
Assistance/Mainten. Name
abc def ghi jkl mno pqr
stu vwx yz
To Next Page
Loading...
