Installer Manual Foleo - Maintenance
Ref. MKT-IM-038 / C - 15.11.2019 77 / 112
8.5.2. Softener cover removal
No. Operation
CAUTION
Do not pull on the cables. Release the connectors from components by pressing on their
locking clips.
A Unclip (3) and open the controller cover (2).
B Disconnect the main cable wire (5).
C Unlock the cover (1) from the slide clips (4) (one on each side of the cover).
D Remove the cover (1).
E Reverse above procedure steps to rebuild.
To Next Page
Loading...
