Pentair HI FLOW SIX-WAY 1-1/2 INCH TOP MOUNT VALVE - Replacement Parts

6
HI FLOW™ Six-Way 1-1/2 Inch Top Mount Valve Installation and User’s Guide
REPLACEMENT PARTS
Item # Part # Description
1 272520 Handle
2 272505 Washer, Plastic (Qty2)
3 272405 Screw, Handle
4 272527 Valve Top, Black
5 272511 O-Ring, Diverter Shaft
6 354053 O-Ring
7 272401 Washer, SS
4
8 272400 Spring, 100lb. 1-13/16 O.D. SS
4
8A 272535 Spring, 100lb. 1-3/8 O.D. SS
4
9 272512 Diverter w/Grasket
10A 354541
Screw, #10-24 Hex Pan HD
(Qty6)
5
11A 272530
Valve Body w/Diffuser - Clamp
Style
11B 272538
Valve Body w/Diffuser - Threaded
Style
12 273512 Air Bleeder w/O-ring
3
13 272541 O-Ring, 3/16” x 4-5/8” I.D.
14 152162 Clamp
15 155050 Pressure Gauge
16 271106 Sightglass
16 272550 Sightglass w/Vacuum Protector
17 271107
Gasket, Sightglass 5/8” I.D. x 1”
O.D.
18 154493 O-Ring, 0.157” x 5.75” I.D.
- 155037 Carton
- 272517 Manual
19 272555 Washer, 9/16 SS
5
20 272554 Nut, #10-24 Serrated Flange SS
5
21 354562 Label, No Petroleum
Notes:
1
VALVE TOP ASSEMBLY P/N 272531 CONSISTS OF ITEMS 1
THRU 9 AND VALVE INSTRUCTIONS 27-2517.
2
VALVES MANUFACTURED BEFORE MARCH 1, 1993 DO NOT
CONTAIN ITEM 16 SIGHTGLASS OR ITEM 17 SIGHTGLASS
GASKET.
3
CLAMP STYLE VALVES MANUFACTURED BEFORE MARCH
1, 1993 CONTAIN A DIFFERENT AIR BLEEDER WITH O-RING
PART NO. 272515. THIS PART IS NOT INTERCHANGEABLE
WITH PART NO. 273512. THREADED VALVES MANUFACTURED
BEFORE MARCH 1, 1993 DO NOT CONTAIN AN AIR BLEEDER
WITH 0-RING.
4
ITEM 8A USED ON VALVES MANUFACTURED AFTER MAY 1,
1992 AND REPLACES BOTH ITEMS 7 AND 8.
5
VALVES MANUFACTURED AFTER APRIL 15, 1994 USE NUT/
BOLT DESIGN, SEE ITEMS 10A, 19, 20, & 21.