Pentair HYDROMATIC SPX50 - User Manual

NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible
party who maintains the system.
MODELS SPX50/SPX50H
SUBMERSIBLE
HAZARDOUS LOCATION PUMPS
INSTALLATION AND SERVICE MANUAL
Item # E-03-415 | Part # 5625-415-1 | © 2012 Pentair Pump Group, Inc. | 11/12/12

Summary

Safety Warnings

Before Installation

Pump Information

General Installation

Motor Seal Failure Warning

Pump Disassembly and Reassembly

Disassembly Procedures

Step-by-step instructions for taking apart the pump for service or repair.

Reassembly Procedures

Detailed steps for correctly putting the pump back together after service.

Pump Troubleshooting

Checking for Moisture in Motor

Red Light Indicates Seal Leak

Overload Trips and High Water Level

Diagnosing causes for control box overloads related to high water levels or pump issues.

Yellow Run Light Stays On

Circuit Breaker Trips

Noisy Pump and Low Flow Rate

Grease and Solids Accumulation

Pump Wiring Diagrams

Pump Wiring Schematic

Pump Wiring Schematic (30-60 Hertz)

SPX50 H Parts List

SPX50 Parts List

Pentair HYDROMATIC SPX50 Specifications