1 4 2406-0007 Drain/Vent Plug (9306C)
1 4 2406-0016 Drain/Vent Plug (9306S)
2 1 0154-9200C1 Pump Casing (9306C)
2 1 0154-9200S1 Pump Casing (9306S)
2A 1 0157-9200C Pump Casing (Universal Flange 220x200)
2B 1 0158-9200C Pump Casing (Universal Flange 300x220 Cast)
2B 1 0158-9200S Pump Casing (Universal Flange 300x220 S.S.)
3 1 2253-0002 Impeller Nut (9306C)
3 1 2253-0006 Impeller Nut (9306S)
4 1 0401-9200P2 Impeller (Nylon Std. 9306C)
4 1 0405-9100P2 Impeller (Polypropylene Optional) (Std. 9306S)
4 1 0407-9306P Impeller (GTX Optional)
5 1 1720-0083 O-ring
6 1 1700-0100 Gasket
7 1 2120-0009 Mechanical Seal (Viton/Ceramic) (Std. 9306C)
7 1 3430-0589 Mechanical Seal (Silicon Carbide) (Std. 9306S)
8 1 0750-9300C2 Mounting Flange (9306C)
8 1 0756-9300S Mounting Flange (9306S)
9 4 2210-0020 Hex Head Cap Screw (9306C)
9 4 2210-0125 Hex Head Cap Screw (9306S)
10 1 1410-0056 Slinger Ring
11 1 1810-0014 Snap Ring
12 1 1820-0013 Retaining Ring
13 1 2000-0010 Ball Bearing
14 1 1410-0131 Cartridge, Front
15 2 1720-0268 O-ring
16 1 2104-0010 Lip Seal
17 1 1410-0130 Seal Spacer
18 1 2029-0014 Thrust Bearing Assembly
19 1 0533-2500 Shaft (HM1C/HM5C)
19 1 0536-2500 Shaft (HM3C)
20 1 0150-2500C Motor Body (includes needle bearing)
21 4 2210-0005 Hex Head Cap Screw
22 2 1720-0110 O-ring
23 1 1600-0044 Dowel Pin (HM1C/HM5C)
23 1 1600-0052 Dowel Pin (HM3C)
24 1 1600-0037 Dowel Pin (HM1C/HM5C)
24 1 1600-0068 Dowel Pin (HM3C)
25 1 3900-0022 Gerotor (HM1C)
25 1 3900-0024 Gerotor (HM3C)
25 1 3900-0048 Gerotor (HM5C)
26 1 0700-2500C1 Gerotor Housing (HM1C Models) 1/2” wide
26 1 0702-2500C1 Gerotor Housing (HM3C Models) 1” wide
26 1 0704-2500C1 Gerotor Housing (HM5C Models) 5/8” wide
27 1 0254-2500C2 Motor End Plate (includes needle bearing)
28 4 2270-0039 Washer
29 4 2220-0021 Cap Screw (HM1C Models)
29 4 2220-0044 Cap Screw (HM3C Models)
29 4 2220-0032 Cap Screw (HM5C Models)
30 1 1720-0108 O-ring
31 1 3360-0021A Pressure Port Adapter (includes o-ring)
32 1 1720-0262 O-ring
33 1 3320-0051A Tank Port Adapter (includes o-ring)
34 1 3220-0029 Bypass Adjusting Screw
35 1 1700-0047 Gasket
36 1 2270-0027 Washer
37 1 2250-0038 Lock Nut
38 1 1610-0031 Roll Pin (HM1C / HM5C)
38 1 1610-0055 Roll Pin (HM3C)
39 1 1810-0026 Snap Ring
40 1 1610-0012 Woodruff Key (9306C)
40 1 04432 Woodruff Key (9306S)
All 9306 Series
Ref. Qty.
No. Req’d. Part No. Description
Parts Kit No. 3430-0748
Contains: One each ball bearing
(Ref. 13),
motor shaft seal (Ref.
16), thread seal gasket (Ref. 35),
two cartridge o-rings (Ref. 15) and
washer (Ref. 36); two each motor
housing o-rings (Ref. 22), and port
adapter o-rings (Ref. 30 & 32).
Ref. Qty.
No. Req’d. Part No. Description
NOTE: When ordering parts,
give QUANTITY, PART
NUMBER, DESCRIPTION, and
COMPLETE MODEL NUMBER.
Reference numbers are used
ONLY to identify parts in the
drawing and are NOT to be
used as order numbers.
Hydraulic Motor Part Nos.
2500-0081C (HM1C Models)
2500-0083C (HM3C Models)
2500-0085C (HM5C Models)
Repair Parts Kit No. 3430-0332
Contains: One mechanical seal (Ref.
7), one o-ring (Ref. 5) and one rubber
gasket (Ref. 6).
Silicon Carbide Seal Kit No. 3430-0589
Contains one each:
mechanical seal (Ref. 7) and o-ring (Ref. 5).
-26-
L-1526 (12/12, Rev. B)
To Next Page
Loading...
