Pentair HYPRO 9300 Series - Page 25

-25-
21 1 0537-2500 Shaft
22 1 1810-0026 Snap Ring
23 1 1610-0055 Roll Pin
24 1 0150-2500C Motor Body (includes needle bearing)
25 4 2210-0005 Hex Head Cap Screw
26 2 1720-0110 O-ring
27 1 1600-0052 Dowel Pin
28 1 1600-0068 Dowel Pin
29 1 3900-0024 Gerotor
30 1 0702-2500C1 Gerotor Housing 1” wide
31 1 0254-2500C2 Motor End Plate (includes needle bearing)
32 4 2270-0039 Washer
33 4 2220-0044 Cap Screw
34 1 1720-0108 O-ring
35 1 3360-0021A Pressure Port Adapter (includes o-ring)
36 1 3320-0051A Tank Port Adapter (includes o-ring)
37 1 1720-0262 O-ring
38 1 3220-0029 Bypass Adjusting Screw
39 1 1700-0047 Gasket
40 1 2270-0027 Washer
41 1 2250-0038 Lock Nut
1 4 2406-0007 Drain / Vent Plug
2 1 0152-9200C Pump Casing
3 1 2253-0002 Impeller Nut
4 1 2270-0071 Washer
5 1 0403-9200P1 Impeller
6 1 1700-0100 Rubber Gasket
7 1 2120-0009 Mechanical Seal (Viton/Ceramic) (Std 9305C)
7 1 3430-0601 Mechanical Seal (Silicon Carbide) (Optional)
8 1 1720-0180 O-ring
9 1 0752-9200C Mounting Flange
10 6 2210-0086 Hex Head Cap Screw
11 1 1410-0056 Slinger Ring
12 1 1810-0014 Snap Ring
13 1 1820-0013 Retaining Ring
14 1 2000-0010 Ball Bearing
15 1 1410-0131 Cartridge, Front
16 2 1720-0268 O-ring
17 1 2104-0010 Lip Seal
18 1 1410-0130 Seal Spacer
19 1 2029-0014 Thrust Bearing Assembly
20 1 1610-0053 Square Key
Models 9305C-HM3C
NOTE: When ordering parts, give
QUANTITY, PART NUMBER,
DESCRIPTION, and COMPLETE
MODEL NUMBER. Reference
numbers are used ONLY to iden-
tify parts in the drawing and are
NOT to be used as order numbers.
Parts Kit No. 3430-0748
Contains: One each ball bearing
(Ref. 14), motor shaft seal (Ref.
17), thread seal gasket (Ref. 39),
two cartridge o-rings (Ref. 16) and
washer (Ref. 40); two each motor
housing o-rings (Ref. 26), and port
adapter o-rings (Ref. 34 & 37).
Ref. Qty.
No. Req’d. Part No. Description
Hydraulic Motor Part No.
2500-0083C
Ref. Qty.
No. Req’d. Part No. Description
Repair Parts Kit No. 3430-0500
Contains one each: mechanical seal
(Ref. 7), o-ring (Ref. 8), and rubber
gasket (Ref. 6).
Silicon Seal Kit No 3430-0601
Contains one each: mechanical
seal (Ref. 7) and O-ring (Ref. 8).
L-1526 (12/12, Rev. B)