Pentair Hypro Series - Page 29

Parts Illustration
Series 4001 and 4101
- 29 -
IMPORTANT:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used ONLY
to point out parts in the drawing and
are NOT to be used as ordering
numbers.
Ref. Qty. Part
No. Req'd. Number Description
110100-4001C Body (Cast Iron) with Std. Seal (4001)
110100-4101C Body (Cast Iron) with Std. Seal (4101)
110100-4001N Body (Ni-Resist) with Std. Seal (4001)
110100-4101N Body (Ni-Resist) with Std. Seal (4101)
110100-4001X Body(SilverCast) with Std. Seal (4001)
110100-4101X Body(SilverCast) with Std. Seal (4101)
210200-4001C Endplate (Cast Iron) with Std. Seal (4001)
210200-4101C Endplate (Cast Iron) with Std. Seal (4101)
210200-4001N Endplate (Ni-Resist) with Std. Seal (4001)
210200-4101N Endplate (Ni-Resist) with Std. Seal (4101)
210200-4001X Endplate (SilverCast) with Std. Seal (4001)
210200-4101X Endplate (SilverCast) with Std. Seal (4101)
310300-4001C Rotor (Cast Iron) & Shaft Assembly (4001)
310300-4101C Rotor (Cast Iron) & Shaft Assembly (4101)
313430-0765 Rotor Assembly (Std. 4001 Ni-Resist & XL)
313430-0766 Rotor Assembly (Std. 4101 Ni-Resist & XL)
3A 1 3430-0780 Rotor Assembly (Hollow Shaft 4001
Ni-Resist & XL)
3A 1 3430-0781 Rotor Assembly (Hollow Shaft 4101
Ni-Resist & XL)
541005-0002 Super Rollers (Std.)
541002-0002 Polypropylene Rollers (Optional)
541055-0002 Teflon Rollers (Optional)
611720-0104 O-Ring Gasket for Endplate
742220-0018 Endplate Screw
Repair Parts Kit No. 3430-0390 Consists of: (4) Ref. 5 Super Rollers,
(1) Ref. 6 O-Ring Gasket, (2) Ref. 8 Viton Seals.
Repair Parts Kit No. 3430-0158 Consists of: (4) Ref. 5 Polypropylene
Rollers, (1) Ref. 6 O-Ring Gasket, (2) Ref. 8 Viton Seals.
Ref. Qty. Part
No. Req'd. Number Description
822107-0002 Viton Seal (Std.)
822102-0001 Buna-N Seal (Optional)
822102-0001T Teflon Coated Buna-N Seal (Optional)
922000-0010 Ball Bearing (High temp. grease)
10 1 3420-0024 Base Kit — Sold Separately
Includes: 1 Base, 2 Bolts, and 2 Lock
washers for mounting pump to electric
motors with 3-1/2" shaft centerline
11 1 3420-0025 Base Kit — Sold Separately
Includes: 1 Base, 2 Bolts, and 2 Lock
washers for mounting pump to electric
motors/gas engines with 4-3/16" shaft
centerlines
12 1 kit 1320-0016 Adapter with 4 set screws for gas engine
mount (5/8" x 5/8") — Sold Separately
12 1 kit 1320-0015 Adapter (5/8" x 3/4") — Sold Separately
13 1 2300-0023 Shaft Bearing Cover
14 1 2300-0021 Bearing Cover
15 1 1420-0001 Locking Collar
16 1 2230-0001 Set Screw
17 1 1510-0054 Base — Sold Separately
18 2 1450-0003 Bumper — Sold Separately
19 2 2210-0003 Bolt — Sold Separately
20 2 2260-0002 Lock Washer — Sold Separately
3A
20
18
19
17
5
15
16
1
5
3
2
7
8
9
14
6
8
9
13
11
12
10