Pentair Hypro Series - Page 35

Parts Illustration
Series 7700
Repair Parts Kits:
No. 3430-0384 Consists of (7) Ref. 7
Super Rollers, (1) Ref. 6 O-ring, and
(2) Ref. 3 Viton seals
No. 3430-0167 Consists of (7) Ref. 7
Polypropylene Rollers, (1) Ref. 6 O-ring,
and (2) Ref. 3 Viton seals
Ref. Qty. Part
No. Req'd. Number Description
112300-0020 Bearing Cover
222008-0001 Sealed Ball Bearing
322112-0003 Viton Seal (Standard)
322112-0001 Buna-N Seal (Optional)
462210-0004 Bolts
510200-7700C Endplate (Cast Iron) with Seal
510200-7700N Endplate (Ni-Resist) with Seal
510200-7700X Endplate (SilverCast) with Seal
611720-0014 O-ring Gasket for Endplate
771005-0004 Super Roller (Standard)
771002-0004 Polypropylene Roller (Optional)
771055-0004 Teflon Roller (Optional)
8 1 kit 3420-0010 Base Kit - Sold Separately
Includes: (1) Base and (4) Bolts
Ref. Qty. Part
No. Req'd. Number Description
910100-7700C Body (Cast Iron) with Seal
910100-7700N Body (Ni-Resist) with Seal
910100-7700X Body (SilverCast) with Seal
10 1 2300-0022 Shaft Bearing Cover
11 1 1610-0005 Key
12 1 0300-7700C Rotor Assembly (Cast Iron)
12 1 0300-7700N Rotor Assembly (Ni-Resist)
12 1 0300-7700X Rotor Assembly (SilverCast)
12 1 0301-7700C Rotor Assembly (Cast Iron)
Rev. Rot.
12 1 0301-7700N Rotor Assembly (Ni-Resist) Rev. Rot.
12 1 0301-7700X Rotor Assembly (SilverCast) Rev.Rot.
IMPORTANT:
When ordering parts, give PART
NUMBER and PART DESCRIPTION.
Reference Numbers are used ONLY to
point out parts in the drawing and are
NOT to be used as ordering numbers.
12
11
1
2
7
9
8
10
3
2
6
5
4
3
- 35 -