Pentair IntelliComm User Manual

29
IntelliFlo Installation and User’s Guide
External Control with IntelliComm Communication Center
The IntelliFlo can be remotely controlled by the Pentair IntelliComm Communication Center using an
optional communications cable (P/N 350122). The IntelliComm provides four pairs of input terminal
connections. These inputs are actuated by either 15 - 240 VAC or 15 - 100 VDC. Using the device's
inputs, the IntelliFlo external control Programs 1-4 can be controlled.
If more than one input is active the highest number will be communicated to the IntelliFlo pump. The
IntelliComm will always communicate to pump address 1. The IntelliFlo control panel remains active when
the IntelliFlo is connected to the IntelliComm.
The following table shows the wiring terminal descriptions for IntelliComm.
External Control
rebmunlanimreTemanlanimreTegatloV
mumixaM
tnerruc
epytesahPycneuqerF
2-1ylppusrewoPCAV042-001Am001tupnI1zH06/05
4-
31margorP
CAV042-51
ro
CDV001-51
*Am1tupnI1zH06/05
6-52margorP
CAV042-51
ro
CDV001-51
*Am1tupnI1zH06/05
8-73margorP
CAV
042-51
ro
CDV001-51
*Am1tupnI1zH06/05
01-94margorP
CAV042-51
ro
CDV001-51
*Am1tupnI1zH06/05
11
21
584-SR
wolleY:ataD+
n
eerG:ataD-
CDV5+ot5-
Am5tuptuO1A/N
dnuorG
Terminals
IntelliComm Communication Center

Pentair IntelliComm Specifications

General

Brand	Pentair
Model	IntelliComm
Category	Swimming Pool Pump
Language	English