Pentair INTELLIFLO VSD2 User Manual

OPERATING THE PUMP 6/20
SET SCREEN CONTRAST
The default setting for the LCD screen is 3. Screen contrast levels can be adjusted from 1 to 5
units for low or high lighting conditions.
Note: Changes to the contrast setting do not update instantaneously. Changes to this setting
must be saved before the contrast level changes.
1. Check that the green power LED is on.
2. Press menu.
3. Press select to select “Settings”.
4. Use the up or down arrows to scroll to “Device” and press select.
5. Use the up or down arrows to scroll to “Contract level”.
6. Press select. Screen will show current contrast setting number.
Use up or down to change number.
7. Press save to save. To cancel any changes, press back to exit without saving.
8. Press the back button to exit.
SET CONTROL PANEL LANGUAGE
To acces the language menu:
1. Check that the green power LED is on.
2. Press menu and press select to select “Settings”.
3. Use the up or down arrows to scroll to “Device” and press select.
4. Use the up or down arrows to scroll to “Select Language” and press select.
5. Use the up or down arrows to choose the desired language.
6. Press save to select the control panel language. To cancel any changes, press back to exit
without saving.
7. Press back to exit.
SET TEMPERATURE UNIT
The pump can be set to either Celsius (°C) or Fahrenheit (°F = default).
1. Check that the green power LED is on.
2. Press menu.
3. Press select to select “Settings”.
4. Use the up or down arrows to scroll to “Device” menu item. Press select.
5. Use the up or down arrows to scroll to “Temperature Units” and press select.
6. Use the up or down arrows to choose Celsius (°C) or Fahrenheit (°F).
7. Press save to save. To cancel any changes, press back to exit without saving.
8. Press back to exit.
17

Pentair INTELLIFLO VSD2 Specifications

General

Brand	Pentair
Model	INTELLIFLO VSD2
Category	Water Pump
Language	English